LAST_UPDATED2
Written by Administrator
Monday, 09 March 2009 12:29
|
|
|
|
 |
| MODEL |
CFM |
LINE SIZE |
| 44 |
6 |
4 |
| 45 |
11 |
5 |
| 66 |
22 |
6 |
| 67 |
34 |
8 |
| 68 |
45 |
10 |
|
|
| |
Meyer Screwveyor Pump is a heavy-duty dry material injection pump, designed to feed dry pulverized material into a pneumatic conveying line. The Screwveyor Pump works where other dilute phase feeders have failed due to problems like abrasive wear, friable materials or fine material dust. Unlike rotary airlocks, which require tight clearances to seal against the conveying air the Screwveyor Pump utilizes conveyed material to form a seal. An integral gate prevents blowback when priming or running empty.
The Screwveyor Pump eliminates blowback and early failure from abrasive wear; it reduces excessive maintenance and unplanned, costly downtime. There are five standard models available. During fabrication and assembly, the Screwveyor Pump is optimized for your specific feeder needs. |
|
|
Features:
|
| Heavy Steel Channel Frame |
| Quad Seal |
| Integral check valve |
| Hard coated shaft assembly |
| Low inlet hopper height |
| Three conveying air inlet points |
| No product contact with bearings |
| Temperatures up to 450°F |
| Low conveying pressure -4 to 12 PS |
Oversize Bearings
| | |
|
Benefits:
|
| Increased conveying rates with less air |
| No blowback, even when running empty |
| Increased resistance to abrasive materials |
| Low Profile |
| Fully warranted and guaranteed |
| Longer bearing life/fewer system shutdowns |
| Stainless steel flap with urethane seal standard |
Reduced operating and maintenance costs
|
|
Industries Where Used
|
| Plastics |
| Chemical |
| Cement |
| Mining |
| Food |
| Asphalt |
|
| | |
